Features:
Customer-specific solutions
Ex-Protection Zone 2/22
Interface variety
Measures linear movements
Profile housing
Simple integration
Wear-free detection
TR-Electronic LP46 Ex-protected Linear Encoder
Linear-Transducer LP46 Ex-protected
(A) ATEX, (L) Linear, (P) Profile
Description
Additional information
| Marka |
|---|
About TR-Electronic
TR-Electronic, otomasyon teknolojisi için ölçüm ve kontrol sistemleri üretir ve geliştirir. TR-Electronic, farklı uygulama türleri için yüksek kaliteli standart ürünler veya özelleştirilmiş çözümler olarak doğru döner kodlayıcıları, doğrusal kodlayıcıları ve sürücüleri tedarik eder. TR-Electronic'teki uzmanlar, fikirleri ve geliştirme bilgileri, yaratıcı ürünlerin ve genişleyen küresel başarının temelidir. TR-Electronic ürün yelpazesi, işlevsellik, kalite ve maliyet etkinliği açısından rekabet avantajına sahiptir.
FİYAT AL
Teklif almak için lütfen başvurunuzu info@project-master.tr adresine göndererek, ihtiyaç duyduğunuz pozisyonları ve şirket detaylarını belirtin.
Specification
General Data
Nominal voltage - Specific value 24 VDC Power consumption <= 3.5 W Measuring principle magnetostrictive Measuring length, standard 50…3600 mm, in steps Characteristics - Validity using original TR Magnets Straight line velocity no restrictions Mounting position no restrictions Material - Measuring body Aluminium extruded profile Magnet Slider other on request PROFINET IO - Interface yes, other on request SSI - Interface yes, other on request Analog - Interface yes, other on request Vibration - Specific value <= 100 m/s² - Sine 50…2000 Hz Shock - Specific value <= 1000 m/s² - Half sine 11 ms Immunity to disturbance DIN EN 61000-6-2 Transient emissions DIN EN 61000-6-3 Working temperature - Standard -20…+60 °C Storage temperature, dry -30…+85 °C Relative humidity 98 %, non condensing Protection class - Standard IP64 Stray magnetic field DIN EN 61000-4-8, Test Level 4 Measuring reference Measuring plane Relev. Ex Directive/Standards - Directive 2014/34/EU (ATEX) Intended use - EN IEC 60079-0 General requirements - EN/IEC 60079-14 Installation, erection - EN 60079-15 Equipment protection "n" - EN/IEC 60079-31 Dust ignition protection “t” - DIN EN 60529 Degrees of protection, IP code - EN 60079-7 Equipment protection "e" Ex protection - Data, Gas - Device group /-category II 3G (Gc, Zone 2) - Ignition protection type ec (increased safety) - Ignition protection type nAc (non-sparking equipment) - Group IIC (Hydrogen) - Group IIB (Ethylen) - Temperature, surface T5 (<= 100 °C) - Special conditions yes (X), observe Ex manual Ex protection - Data, Dust - Device group /-category II 3D (Dc, Zone 22) - Ignition protection type tc (Protection by enclosure) - Group IIIC (conductive dust) - Group IIIB (non conductive dust)
Nominal voltage - Specific value 24 VDC Power consumption <= 3.5 W Measuring principle magnetostrictive Measuring length, standard 50…3600 mm, in steps Characteristics - Validity using original TR Magnets Straight line velocity no restrictions Mounting position no restrictions Material - Measuring body Aluminium extruded profile Magnet Slider other on request PROFINET IO - Interface yes, other on request SSI - Interface yes, other on request Analog - Interface yes, other on request Vibration - Specific value <= 100 m/s² - Sine 50…2000 Hz Shock - Specific value <= 1000 m/s² - Half sine 11 ms Immunity to disturbance DIN EN 61000-6-2 Transient emissions DIN EN 61000-6-3 Working temperature - Standard -20…+60 °C Storage temperature, dry -30…+85 °C Relative humidity 98 %, non condensing Protection class - Standard IP64 Stray magnetic field DIN EN 61000-4-8, Test Level 4 Measuring reference Measuring plane Relev. Ex Directive/Standards - Directive 2014/34/EU (ATEX) Intended use - EN IEC 60079-0 General requirements - EN/IEC 60079-14 Installation, erection - EN 60079-15 Equipment protection "n" - EN/IEC 60079-31 Dust ignition protection “t” - DIN EN 60529 Degrees of protection, IP code - EN 60079-7 Equipment protection "e" Ex protection - Data, Gas - Device group /-category II 3G (Gc, Zone 2) - Ignition protection type ec (increased safety) - Ignition protection type nAc (non-sparking equipment) - Group IIC (Hydrogen) - Group IIB (Ethylen) - Temperature, surface T5 (<= 100 °C) - Special conditions yes (X), observe Ex manual Ex protection - Data, Dust - Device group /-category II 3D (Dc, Zone 22) - Ignition protection type tc (Protection by enclosure) - Group IIIC (conductive dust) - Group IIIB (non conductive dust)
