Features:
Customer-specific solutions
Flexible programming
Further interfaces available
Modular mechanical design
Modular product line
Redundant scanning system
TR-Electronic IDV58 Incremental Encoder
Incremental-Encoder IDV58
(I) Incremental, (V) Solid shaft, Incremental, resolution progr.
Description
Additional information
| Marka |
|---|
About TR-Electronic
TR-Electronic, otomasyon teknolojisi için ölçüm ve kontrol sistemleri üretir ve geliştirir. TR-Electronic, farklı uygulama türleri için yüksek kaliteli standart ürünler veya özelleştirilmiş çözümler olarak doğru döner kodlayıcıları, doğrusal kodlayıcıları ve sürücüleri tedarik eder. TR-Electronic'teki uzmanlar, fikirleri ve geliştirme bilgileri, yaratıcı ürünlerin ve genişleyen küresel başarının temelidir. TR-Electronic ürün yelpazesi, işlevsellik, kalite ve maliyet etkinliği açısından rekabet avantajına sahiptir.
FİYAT AL
Teklif almak için lütfen başvurunuzu info@project-master.tr adresine göndererek, ihtiyaç duyduğunuz pozisyonları ve şirket detaylarını belirtin.
Specification
General data
Nominal voltage - Specific value 24 VDC - Limit values, min/max 11/28 VDC Nominal current, typically - Specific value 100 mA - Condition unloaded Supply - Optional 5 VDC ± 5 % - Multi feeding dual Current consump. no load, 5 V <= 160 mA Device design - Redundant scanning system yes, double Signal form Square Incremental signals, square - Channels K1+, K1-, K2+, K2- - Phase position, electrically 90 ° Zero pulse, square - Channel (Channels) K0+, K0- - Number of revolutions 1x Impulses, square wave >= 2…<= 1024 > 1024: 2048, 4096, 8192 Output driver, TTL - Output level RS-422, 5 VDC - Load current <= 50 mA - Output frequency <= 300 kHz, ± 15 ° Output driver, HTL - Output level Push-Pull, supply voltage - Load current <= 30 mA - Output frequency <= 150 kHz, ± 15 ° Parameter/Function, changeable Number of pulses 0-Pulse K0: Pulse length 0-Pulse K0: Number of pulses Phase position: K0/K1/K2 Preset parameter Type of parametrization programmable Programming - Tool TR-Soft: TRWinProg External inputs - Preset electronic adjustment - Logic level "0“ < +2V, "1“ = Supply Maximum Speed, mechanically <= 6000 1/min Shaft load, axial/radial <= 10 N, <= 20 N Bearing life time >= 3.9E+10 revolutions Bearing life time - Parameter - Speed 6000 1/min - Operating temperature 60 °C - Shaft load, axial/radial <= 5 N, <= 10 N Point of origin, shaft load at the shaft end Shaft type - Shaft diameter [mm] 6 - Shaft diameter [mm] 8 - Shaft diameter [mm] 10 - Shaft diameter [mm] 12 - Shaft diameter ["] 3/8 Angular acceleration <= 10E+4 rad/s² Moment of inertia, typically 5E-6 kg m² Start-up torque, 20 °C 4 Ncm Mass, typically 0.6 kg…1 kg
Nominal voltage - Specific value 24 VDC - Limit values, min/max 11/28 VDC Nominal current, typically - Specific value 100 mA - Condition unloaded Supply - Optional 5 VDC ± 5 % - Multi feeding dual Current consump. no load, 5 V <= 160 mA Device design - Redundant scanning system yes, double Signal form Square Incremental signals, square - Channels K1+, K1-, K2+, K2- - Phase position, electrically 90 ° Zero pulse, square - Channel (Channels) K0+, K0- - Number of revolutions 1x Impulses, square wave >= 2…<= 1024 > 1024: 2048, 4096, 8192 Output driver, TTL - Output level RS-422, 5 VDC - Load current <= 50 mA - Output frequency <= 300 kHz, ± 15 ° Output driver, HTL - Output level Push-Pull, supply voltage - Load current <= 30 mA - Output frequency <= 150 kHz, ± 15 ° Parameter/Function, changeable Number of pulses 0-Pulse K0: Pulse length 0-Pulse K0: Number of pulses Phase position: K0/K1/K2 Preset parameter Type of parametrization programmable Programming - Tool TR-Soft: TRWinProg External inputs - Preset electronic adjustment - Logic level "0“ < +2V, "1“ = Supply Maximum Speed, mechanically <= 6000 1/min Shaft load, axial/radial <= 10 N, <= 20 N Bearing life time >= 3.9E+10 revolutions Bearing life time - Parameter - Speed 6000 1/min - Operating temperature 60 °C - Shaft load, axial/radial <= 5 N, <= 10 N Point of origin, shaft load at the shaft end Shaft type - Shaft diameter [mm] 6 - Shaft diameter [mm] 8 - Shaft diameter [mm] 10 - Shaft diameter [mm] 12 - Shaft diameter ["] 3/8 Angular acceleration <= 10E+4 rad/s² Moment of inertia, typically 5E-6 kg m² Start-up torque, 20 °C 4 Ncm Mass, typically 0.6 kg…1 kg
