Features:
CIP Node on EtherNet/IP, CT17
CIP Safety
Intelligent diagnoses
Parameterizable gear unit
Preset “on the fly”
Salt water resistant
SIL3, PLe
Speed signal
TR-Electronic CDS582M – EIP + FS3 Absolute Encoder
Absolute-Encoder CDS582M – EIP + FS3
(C) Compact Encoder, (S) Blind shaft, EtherNet/IP
Description
Additional information
| Marka |
|---|
About TR-Electronic
TR-Electronic, otomasyon teknolojisi için ölçüm ve kontrol sistemleri üretir ve geliştirir. TR-Electronic, farklı uygulama türleri için yüksek kaliteli standart ürünler veya özelleştirilmiş çözümler olarak doğru döner kodlayıcıları, doğrusal kodlayıcıları ve sürücüleri tedarik eder. TR-Electronic'teki uzmanlar, fikirleri ve geliştirme bilgileri, yaratıcı ürünlerin ve genişleyen küresel başarının temelidir. TR-Electronic ürün yelpazesi, işlevsellik, kalite ve maliyet etkinliği açısından rekabet avantajına sahiptir.
FİYAT AL
Teklif almak için lütfen başvurunuzu info@project-master.tr adresine göndererek, ihtiyaç duyduğunuz pozisyonları ve şirket detaylarını belirtin.
Specification
General data
Nominal voltage - Specific value 24 VDC - Limit values, min/max 10/30 VDC Nominal current, typically - Specific value 110 mA - Specific value 130 mA with second interface - Condition unloaded Supply - SELV/PELV IEC 60364-4-41 - In case of UL / CSA approval according to NEC Class 2 Device design - Type Multi-Turn - Redundant scanning system yes, double - Design optical/magnetic Total resolution <= 29 Bit Number of steps per revolution <= 8192 = 13 bit resolution Number of revolutions <= 65536 Accuracy (functional) 12 Bit, Single-Turn; 0.087 ° EtherNet/IP™ - Interface - EtherNet/IP™ IEC 61784-1 CP 2/2, IEC 61158 - Physical Layer Fast Ethernet, ISO/IEC 8802-3 - Device profile Encoder Device Profile 0x22 - Dynamic Host Config. Protocol DHCP is supported - IP-Address adjustable via rotary switches - Ethernet/IP Adapter CT17 Conformant - CIP Safety Specification Edition 2.20 SSI - Interface - Equipment Optional interface - SSI-Clock input RS-422; 2-wire - SSI-Data output RS-422, 2-wire - SSI-Clock frequency <= 1MHz - Output code Binary, Gray - Number of data bits 8…29 - Type of parametrization programmable - MTTFd, SSI 150 a Incremental - Interface - Equipment Optional interface - Signal form Square wave - Signal form, alternative SIN / COS - Incremental signals, square K1± K2± - Incremental signals, SIN/COS SIN± COS±, 1 Vss - Impulses, square wave 1024…5120, in steps of 1024 - Impulses, SIN/COS - Output driver, TTL RS-422, 5 VDC - Output driver, HTL Push-Pull, Supply Voltage - Type of parametrization programmable - MTTFd, square 180 a - MTTFd, SIN/COS 190 a - Duty factor, square 50 %, ± <= 10 % - Phase angle, square 90 °, ± <= 20 ° (electr.) Transmission rate - Specific value 100 MBit/s Cycle time (RPI cycle times) - Not safety related Min: 1 ms (non-safety) - Not safety related Default: 20 ms (non-safety) - Safety related Min: 5 ms (safety) - Safety related Default: 20 ms (safety) Parameter/Function, changeable Integration time Preset parameter Scaling parameter Monitoring window Counting direction Velocity parameter Type of parametrization programmable Programming - Tool Fieldbus-Device SNCT Device Applet Functional safety - Safety principle Redundance with cross compare - SIL-Standardization DIN EN 61508 / DIN EN 62061 - SIL-Standardization DIN EN 61800-5-2 - SIL-Level SIL3 / SIL CL 3 - PL-Standardization DIN EN ISO 13849 - Performance-Level (PL) PLe / Cat. 4 - Service life 20 Years - PFH / PFH [D] 1.13E-9 1/h - PFH / PFH [D] PFH: DIN EN 61508-4 - PFH / PFH [D] PFH [D]: DIN EN ISO 13849-1 - PFDav, T = 20 a 9.84E-5 - MTTFd 136 a - DCavg 99 %, high - Mode High demand, continuous - Proof-Test-Interval T1 = 20 Years - Accuracy (safety) 8 Bit, Single-Turn; 1.406 ° Safety functions - DIN EN 61800-5-2 SLP (safely-limited position) - DIN EN 61800-5-2 SDI (safe direction) - DIN EN 61800-5-2 SCA (safe cam) - DIN EN 61800-5-2 SS1 (safe stop 1) - DIN EN 61800-5-2 SS2 (safe stop 2) - DIN EN 61800-5-2 SOS (safe operating stop) - DIN EN 61800-5-2 SLS (safely-limited speed) - DIN EN 61800-5-2 SSR (safe speed range) - DIN EN 61800-5-2 SSM (safe speed monitor) Internal process safety time - CIP Safety 9.5 ms + RPI Maximum Speed, mechanically <= 6000 1/min Shaft load, axial/radial Own mass Bearing life time >= 3.9E+10 revolutions Bearing life time - Parameter - Speed 3000 1/min - Operating temperature 60 °C Shaft type - Shaft diameter [mm] 8 - Shaft diameter [mm] 10 - Shaft diameter [mm] 12 - Shaft diameter [mm] 14 - Shaft diameter [mm] 15 - Shaft forming Parallel key/Groove Angular acceleration <= 10E+4 rad/s² Moment of inertia, worst-case <= 9.0E-6 kg m² at shaft diameter 10 mm depending from shaft forming Start-up torque, worst-case <= 3.7 Ncm (IP65,-20 °C,+6 σ) <= 10 Ncm (IP67,-20 °C,+6 σ) at shaft diameter 10 mm depending from shaft forming Circular runout ± 0.3 mm (static, radial) Circular runout, TH mounting - TH Torque holder - Type1 (static/dynamic) Type1 axial ± 0.13/0.1 mm - Type1 (static/dynamic) Type1 radial ± 0.25/0.1 mm - Equipment optional Mass, typically 0.3…0.5 kg Isolation voltage 500 V
Nominal voltage - Specific value 24 VDC - Limit values, min/max 10/30 VDC Nominal current, typically - Specific value 110 mA - Specific value 130 mA with second interface - Condition unloaded Supply - SELV/PELV IEC 60364-4-41 - In case of UL / CSA approval according to NEC Class 2 Device design - Type Multi-Turn - Redundant scanning system yes, double - Design optical/magnetic Total resolution <= 29 Bit Number of steps per revolution <= 8192 = 13 bit resolution Number of revolutions <= 65536 Accuracy (functional) 12 Bit, Single-Turn; 0.087 ° EtherNet/IP™ - Interface - EtherNet/IP™ IEC 61784-1 CP 2/2, IEC 61158 - Physical Layer Fast Ethernet, ISO/IEC 8802-3 - Device profile Encoder Device Profile 0x22 - Dynamic Host Config. Protocol DHCP is supported - IP-Address adjustable via rotary switches - Ethernet/IP Adapter CT17 Conformant - CIP Safety Specification Edition 2.20 SSI - Interface - Equipment Optional interface - SSI-Clock input RS-422; 2-wire - SSI-Data output RS-422, 2-wire - SSI-Clock frequency <= 1MHz - Output code Binary, Gray - Number of data bits 8…29 - Type of parametrization programmable - MTTFd, SSI 150 a Incremental - Interface - Equipment Optional interface - Signal form Square wave - Signal form, alternative SIN / COS - Incremental signals, square K1± K2± - Incremental signals, SIN/COS SIN± COS±, 1 Vss - Impulses, square wave 1024…5120, in steps of 1024 - Impulses, SIN/COS - Output driver, TTL RS-422, 5 VDC - Output driver, HTL Push-Pull, Supply Voltage - Type of parametrization programmable - MTTFd, square 180 a - MTTFd, SIN/COS 190 a - Duty factor, square 50 %, ± <= 10 % - Phase angle, square 90 °, ± <= 20 ° (electr.) Transmission rate - Specific value 100 MBit/s Cycle time (RPI cycle times) - Not safety related Min: 1 ms (non-safety) - Not safety related Default: 20 ms (non-safety) - Safety related Min: 5 ms (safety) - Safety related Default: 20 ms (safety) Parameter/Function, changeable Integration time Preset parameter Scaling parameter Monitoring window Counting direction Velocity parameter Type of parametrization programmable Programming - Tool Fieldbus-Device SNCT Device Applet Functional safety - Safety principle Redundance with cross compare - SIL-Standardization DIN EN 61508 / DIN EN 62061 - SIL-Standardization DIN EN 61800-5-2 - SIL-Level SIL3 / SIL CL 3 - PL-Standardization DIN EN ISO 13849 - Performance-Level (PL) PLe / Cat. 4 - Service life 20 Years - PFH / PFH [D] 1.13E-9 1/h - PFH / PFH [D] PFH: DIN EN 61508-4 - PFH / PFH [D] PFH [D]: DIN EN ISO 13849-1 - PFDav, T = 20 a 9.84E-5 - MTTFd 136 a - DCavg 99 %, high - Mode High demand, continuous - Proof-Test-Interval T1 = 20 Years - Accuracy (safety) 8 Bit, Single-Turn; 1.406 ° Safety functions - DIN EN 61800-5-2 SLP (safely-limited position) - DIN EN 61800-5-2 SDI (safe direction) - DIN EN 61800-5-2 SCA (safe cam) - DIN EN 61800-5-2 SS1 (safe stop 1) - DIN EN 61800-5-2 SS2 (safe stop 2) - DIN EN 61800-5-2 SOS (safe operating stop) - DIN EN 61800-5-2 SLS (safely-limited speed) - DIN EN 61800-5-2 SSR (safe speed range) - DIN EN 61800-5-2 SSM (safe speed monitor) Internal process safety time - CIP Safety 9.5 ms + RPI Maximum Speed, mechanically <= 6000 1/min Shaft load, axial/radial Own mass Bearing life time >= 3.9E+10 revolutions Bearing life time - Parameter - Speed 3000 1/min - Operating temperature 60 °C Shaft type - Shaft diameter [mm] 8 - Shaft diameter [mm] 10 - Shaft diameter [mm] 12 - Shaft diameter [mm] 14 - Shaft diameter [mm] 15 - Shaft forming Parallel key/Groove Angular acceleration <= 10E+4 rad/s² Moment of inertia, worst-case <= 9.0E-6 kg m² at shaft diameter 10 mm depending from shaft forming Start-up torque, worst-case <= 3.7 Ncm (IP65,-20 °C,+6 σ) <= 10 Ncm (IP67,-20 °C,+6 σ) at shaft diameter 10 mm depending from shaft forming Circular runout ± 0.3 mm (static, radial) Circular runout, TH mounting - TH Torque holder - Type1 (static/dynamic) Type1 axial ± 0.13/0.1 mm - Type1 (static/dynamic) Type1 radial ± 0.25/0.1 mm - Equipment optional Mass, typically 0.3…0.5 kg Isolation voltage 500 V
