Features:
Dewfall proof
Functional safety
Preset “on the fly”
Redundant scanning system
Salt water resistant
SIL2, PLd
TR-Electronic CDH582MM – EPL + FS2 Absolute Encoder
Absolute-Encoder CDH582MM – EPL + FS2
(C) Compact Encoder, (H) Hollow shaft, POWERLINK
Description
Additional information
| Marka |
|---|
About TR-Electronic
TR-Electronic, otomasyon teknolojisi için ölçüm ve kontrol sistemleri üretir ve geliştirir. TR-Electronic, farklı uygulama türleri için yüksek kaliteli standart ürünler veya özelleştirilmiş çözümler olarak doğru döner kodlayıcıları, doğrusal kodlayıcıları ve sürücüleri tedarik eder. TR-Electronic'teki uzmanlar, fikirleri ve geliştirme bilgileri, yaratıcı ürünlerin ve genişleyen küresel başarının temelidir. TR-Electronic ürün yelpazesi, işlevsellik, kalite ve maliyet etkinliği açısından rekabet avantajına sahiptir.
FİYAT AL
Teklif almak için lütfen başvurunuzu info@project-master.tr adresine göndererek, ihtiyaç duyduğunuz pozisyonları ve şirket detaylarını belirtin.
Specification
General data
Nominal voltage - Specific value 24 VDC - Limit values, min/max 10/30 VDC Nominal current, typically - Specific value 100 mA - Specific value 120 mA with second interface - Condition unloaded Supply - SELV/PELV IEC 60364-4-41 - In case of UL / CSA approval according to NEC Class 2 Device design - Type Multi-Turn - Redundant scanning system yes, double - Design magnetic/magnetic Total resolution <= 29 Bit Number of steps per revolution <= 8192 = 13 bit resolution Number of revolutions <= 65536 Accuracy (functional) 8 Bit, Single-Turn; 1.406 ° POWERLINK - Interface - POWERLINK IEC 61158: CPF13 - Physical Layer Fast Ethernet, ISO/IEC 8802-3 - Communication profile EPSG DS-301 V1.3.0 - Safety Profile Specification EPSG WDP-304 V1.5.2 openSAFETY - POWERLINK Specification V2.0 SSI - Interface - Equipment Optional interface - SSI-Clock input RS-422; 2-wire - SSI-Data output RS-422, 2-wire - SSI-Clock frequency <= 1MHz - SSI-Mono time, typically 15 µs, 20 µs, 50 µs, 500 µs - Output code Binary, Gray - Number of data bits 8…29 - Type of parametrization programmable - MTTFd, SSI 150 a Transmission rate - Specific value 100 MBit/s Cycle time >= 400 µs (Bus) - Not safety related 0.5 ms - Safety related 0.500 ms Parameter/Function, changeable Integration time Preset parameter TR-Profile Legacy-Profile Scaling parameter Monitoring window Counting direction Velocity parameter Type of parametrization programmable Programming - Tool Fieldbus-Device Functional safety - Safety principle Redundance with cross compare - SIL-Standardization DIN EN 61508 / DIN EN 62061 - SIL-Standardization DIN EN 61800-5-2 - SIL-Level SIL2 / SIL CL 2 - PL-Standardization DIN EN ISO 13849 - Performance-Level (PL) PLd / Cat. 3 - Service life 20 Years - PFH / PFH [D] 2.00E-8 1/h - PFH / PFH [D] PFH: DIN EN 61508-4 - PFH / PFH [D] PFH [D]: DIN EN ISO 13849-1 - PFDav, T = 20 a 1.70E-3 - MTTFd 170 a, high - DCavg 90 % - Mode High demand, continuous - Proof-Test-Interval T1 = 20 Years - Accuracy (safety) 7 Bit, Single-Turn; 2.812 ° Safety functions - DIN EN 61800-5-2 SLP (safely-limited position) - DIN EN 61800-5-2 SDI (safe direction) - DIN EN 61800-5-2 SCA (safe cam) - DIN EN 61800-5-2 SS1 (safe stop 1) - DIN EN 61800-5-2 SS2 (safe stop 2) - DIN EN 61800-5-2 SOS (safe operating stop) - DIN EN 61800-5-2 SLS (safely-limited speed) - DIN EN 61800-5-2 SSR (safe speed range) - DIN EN 61800-5-2 SSM (safe speed monitor) Maximum Speed, mechanically <= 6000 1/min Shaft load, axial/radial Own mass Bearing life time >= 3.9E+10 revolutions Bearing life time - Parameter - Speed 3000 1/min - Operating temperature 60 °C Shaft type - Shaft diameter [mm] 8 - Shaft diameter [mm] 10 - Shaft diameter [mm] 12 - Shaft diameter [mm] 14 - Shaft diameter [mm] 15 - Shaft forming Parallel key/Groove Angular acceleration <= 10E+4 rad/s² Moment of inertia, worst-case <= 9.5E-6 kg m² at shaft diameter 10 mm depending from shaft forming Start-up torque, worst-case <= 3.7 Ncm at shaft diameter 10 mm depending from shaft forming Circular runout ± 0.3 mm (static, radial) Circular runout, TH mounting - TH Torque holder - Type1 (static/dynamic) Type1 axial ± 0.13/0.1 mm - Type1 (static/dynamic) Type1 radial ± 0.25/0.1 mm - Equipment optional Mass, typically 0.3…0.5 kg Isolation voltage 500 V
Nominal voltage - Specific value 24 VDC - Limit values, min/max 10/30 VDC Nominal current, typically - Specific value 100 mA - Specific value 120 mA with second interface - Condition unloaded Supply - SELV/PELV IEC 60364-4-41 - In case of UL / CSA approval according to NEC Class 2 Device design - Type Multi-Turn - Redundant scanning system yes, double - Design magnetic/magnetic Total resolution <= 29 Bit Number of steps per revolution <= 8192 = 13 bit resolution Number of revolutions <= 65536 Accuracy (functional) 8 Bit, Single-Turn; 1.406 ° POWERLINK - Interface - POWERLINK IEC 61158: CPF13 - Physical Layer Fast Ethernet, ISO/IEC 8802-3 - Communication profile EPSG DS-301 V1.3.0 - Safety Profile Specification EPSG WDP-304 V1.5.2 openSAFETY - POWERLINK Specification V2.0 SSI - Interface - Equipment Optional interface - SSI-Clock input RS-422; 2-wire - SSI-Data output RS-422, 2-wire - SSI-Clock frequency <= 1MHz - SSI-Mono time, typically 15 µs, 20 µs, 50 µs, 500 µs - Output code Binary, Gray - Number of data bits 8…29 - Type of parametrization programmable - MTTFd, SSI 150 a Transmission rate - Specific value 100 MBit/s Cycle time >= 400 µs (Bus) - Not safety related 0.5 ms - Safety related 0.500 ms Parameter/Function, changeable Integration time Preset parameter TR-Profile Legacy-Profile Scaling parameter Monitoring window Counting direction Velocity parameter Type of parametrization programmable Programming - Tool Fieldbus-Device Functional safety - Safety principle Redundance with cross compare - SIL-Standardization DIN EN 61508 / DIN EN 62061 - SIL-Standardization DIN EN 61800-5-2 - SIL-Level SIL2 / SIL CL 2 - PL-Standardization DIN EN ISO 13849 - Performance-Level (PL) PLd / Cat. 3 - Service life 20 Years - PFH / PFH [D] 2.00E-8 1/h - PFH / PFH [D] PFH: DIN EN 61508-4 - PFH / PFH [D] PFH [D]: DIN EN ISO 13849-1 - PFDav, T = 20 a 1.70E-3 - MTTFd 170 a, high - DCavg 90 % - Mode High demand, continuous - Proof-Test-Interval T1 = 20 Years - Accuracy (safety) 7 Bit, Single-Turn; 2.812 ° Safety functions - DIN EN 61800-5-2 SLP (safely-limited position) - DIN EN 61800-5-2 SDI (safe direction) - DIN EN 61800-5-2 SCA (safe cam) - DIN EN 61800-5-2 SS1 (safe stop 1) - DIN EN 61800-5-2 SS2 (safe stop 2) - DIN EN 61800-5-2 SOS (safe operating stop) - DIN EN 61800-5-2 SLS (safely-limited speed) - DIN EN 61800-5-2 SSR (safe speed range) - DIN EN 61800-5-2 SSM (safe speed monitor) Maximum Speed, mechanically <= 6000 1/min Shaft load, axial/radial Own mass Bearing life time >= 3.9E+10 revolutions Bearing life time - Parameter - Speed 3000 1/min - Operating temperature 60 °C Shaft type - Shaft diameter [mm] 8 - Shaft diameter [mm] 10 - Shaft diameter [mm] 12 - Shaft diameter [mm] 14 - Shaft diameter [mm] 15 - Shaft forming Parallel key/Groove Angular acceleration <= 10E+4 rad/s² Moment of inertia, worst-case <= 9.5E-6 kg m² at shaft diameter 10 mm depending from shaft forming Start-up torque, worst-case <= 3.7 Ncm at shaft diameter 10 mm depending from shaft forming Circular runout ± 0.3 mm (static, radial) Circular runout, TH mounting - TH Torque holder - Type1 (static/dynamic) Type1 axial ± 0.13/0.1 mm - Type1 (static/dynamic) Type1 radial ± 0.25/0.1 mm - Equipment optional Mass, typically 0.3…0.5 kg Isolation voltage 500 V
